Safe operation of flat irons

When using flat irons (also known as hair straighteners), it is important to follow the correct operating steps to ensure safety and achieve the best results. Here are the safe ways to use flat irons:

1. Preparation

Check the function and condition of the flat iron: Before use, make sure that the flat iron is not damaged and the cord and plug are not damaged.

Use suitable hair care products: When flat ironing, protect your hair from high temperature damage before using heat protection spray or hair care essential oil.

2. Set the appropriate temperature

Adjust the temperature according to the hair quality:

Fine and soft hair: It is recommended to set it between 160-180°C.

Normal hair: It is recommended to set it between 180-200°C.

Coarse and hard hair: It is recommended to set it between 200-220°C.

When using a flat iron, avoid setting the temperature too high, as too high a temperature may damage the hair.

3. Partitioning

Divide the hair into several parts: For easy operation, you can use hairpins to divide the hair into three areas: upper, middle and lower, and treat them one by one. You can start from the bottom and gradually move up.

4. Operation steps

Take short hair: Do not clamp too much hair each time. It is recommended to clamp 1-2 inches of hair each time to ensure uniform clamping effect.

Clamp the hair bundle and pull slowly: Clamp the hair bundle with the flat clamp and slide the clamp slowly from the root to the end of the hair. Do not pull it quickly to avoid pulling the hair and causing damage.

Avoid clamping the same hair bundle repeatedly: Just clamp each hair bundle once, and avoid repeated heating on the same hair bundle, which can reduce heat damage.

5. Pay attention to the position of the clamp

Avoid contact with the skin: The heating plate of the clamp is usually very hot. Be careful when using it to avoid direct contact with the skin to prevent burns.

Prevent clamping the ears or neck: Try to pull the hair to the right position during operation to avoid clamping sensitive parts such as ears and neck.

6. Clean up after use

Turn off the power and unplug: After use, turn off the flat clamp immediately and unplug the power plug. Wait until the clamp is completely cooled before cleaning and storing.

Clean the splint: Clean the surface of the splint regularly, and avoid using hair oil or hair care products to affect the use effect. You can wipe it gently with a damp cloth, and avoid using chemical cleaners.

7. Storage

Avoid long-term exposure to humid environments: After use, make sure the splint is completely cooled before receiving it, and store it in a dry place to avoid damage to the appliance caused by a humid environment.

Keep away from children and pets: Make sure the splint is stored in a place where children and pets cannot reach, otherwise accidents will occur.

Tips:

Avoid high temperature: The high temperature of the flat splint can quickly improve the hairstyle, but too high a temperature can cause damage to the hair. Make sure to adjust the temperature in time to protect the health of the hair.

Don't rush to use: When using it at high temperature, don't rush to pull the splint through the hair. You can stay for a while temporarily to ensure the effect, but don't stay too long to damage the hair.

Follow these safety operations to effectively avoid safety hazards when clipping hair, while protecting the health of the hair, so that each use can achieve the desired effect.